Blaylock Gasket & Packing

Home	Fiber Stock
Contact Us	Blaylock Gasket & Packing is able to offer a wide variety of fiber products to meet your sealing requirements with our supplier partners. From glycerin treated vegetable fiber available with or without a U.L. branding to fiber materials coated with a vast spectrum of products we can meet all of your specifications. Contact us with any questions or for a material recommendation based on your engineered requirements. From print to production, in most cases Blaylock Gasket & Packing can have you in production in rapid time. As always Blaylock Gasket & Packing NEVER charges an expedite fee to process your order. Our pledge is to meet YOUR scheduling requirements. Blaylock Gasket & Packing works as a partner with it's customers in providing sealing solutions. Our supplier partners engineering and processing capabilities offer a wide range of solutions to sealing problems. With over sixty materials to choose from, ranging from standard grades to the most advanced, we can seal, insulate or shim the most challenging of applications. By applying special coatings we can customize sealing release and adhesion properties to meet the most demanding requirements. For more information, please call Jeff at the number above or email us at jeff@blaylockgasket.com Aramid (Non-Asbestos) for Aramid (Non-Asbestos) materials, click here Our gaskets and sealing materials are used in a wide variety of applications, including:
Die Cutting
Tools->
Mil Specs
Cork->
Fiber Stock
High-Temp Materials->
Teflon
O-Rings
Mechanical Packing->
Plastic
Rubber->
Sponge & Foam
Spiral Wound
Custom Fabrication

Automotive
HD Truck
Meters
Medical
Compressors
Aerospace

Electronic
Appliance
Pumps
Agriculture
Filters

Small Engine
Transmission
Valves
Controls
Off Road Vehicles

Products

Characteristics and Uses

Compressibility
% @ 35.5 MP's
(5000 psi)

Compressibility
% @ 6.89 MP's
(1000 psi)

Minimum
Recovery
%

Tensile
Strength
Minimum %

ASTM Oil No. 3

ASTM Fuel B

Distilled Water

Thickness
Increase
Maximum %

Weight
Increase
Maximum %

Thickness
Increase
Maximum %

Weight
Increase
Maximum %

Thickness
Increase
Maximum %

Weight
Increase
Maximum %

Branded Vellumoid

Treated cellulose fiber material impregnated with a protein glue and glycerin binder. General purpose gasket material. Service temperatures up to 250°F.UL listed.

25-40

2000

505 Fiber

Economical treated fiber material impregnated with a protein and glycerin binder. Service in moderate duty applications at temperatures up to 250° F.

25-40

2000

Velbuna WG-5

A nitrile rubber and cellulose fiber high density beater addition material. Highly resistant to oils, fuels, greases, water and coolants. WG-5 demonstrates maximum resistance to heat aging at service temperatures up to 300° F.

10-20

3000

Velbuna WG-25

A blended rubber and cellulose fiber medium density beater addition material. Demonstrates good resistance to oils, water coolants and salt solutions. at service temperatures up to 300° F.

15-30

1700

Velbuna WG-57-G

An economical low density cellulose and styrene butadiene rubber beater addition material. WG-57-G is a tough, versatile material intended for applications where a low cost beater addition type material is indicated at service temperatures up to 350° F.

15-35

1500

Vellutherm 600

A non-asbestos beater addition material designed to function as a high swell gasket material when exposed to petroleum oils and fuels. Vellutherm 600 is formulated with a special blend of elastomers to provide an optimum balance of properties at service temperatures up to 350° F.

15-30

800

10-25

10-40

Vellutherm 611

A non-asbestos beater addition material consisting of a unique blend of fibers and other components with a cured nitrile rubber binder. Vellutherm 611 demonstrates high compressive strength and excellent dimensional stability under varying ambient humidities at service temperatures up to 350° F.

10 - 20

2000

Vellutherm 650

A non-asbestos beater addition material consisting of blended fibers with a cured nitrile binder. Vellutherm 650 is an economical medium density material for use in general automotive and industrial applications at service temperatures up to 350° F.

30 max.

1200

40.0

60.0

Bucote

Bucote is a hard, highly densified fiber material with a nitrile rubber coating on both sides. Bucote is designed for use in rigid flange applications when spacing of component parts is critical.

3 - 10

3500

Velcar B-10

Velcar is a treated fiber base material with a nitrile rubber coating on both sides. Velcar is highly resistant to oils, gasoline, diesel and heating fuels at temperatures up to 250° F.

25 - 40

1500

Nicote

Nicote is a specially designed material designed for difficult sealing applications. Nicote approaches the sealing qualities of rubber, but has true compressibility. Nicote is composed of a rubber treated cellulose fiber base with a nitrile rubber coating on both sides. It demonstrates excellent resistance to gasoline, fuel oils, water and a number of solvents at service temperatures up to 300° F.

25 - 40

1000

Vellutherm 611

A non-asbestos beater addition material consisting of a unique blend of fibers and other components with a cured nitrile binder. Vellutherm 611 demonstrates high compressive strength and excellent dimensional stability under varying ambient humidities at service temperatures up to 350°F.

10-20

3000

Vellutherm 650

A non-asbestos beater addition material consisting of blended fibers with a cured nitrile binder. Vellutherm 650 is an medium density material for use in general automotive and industrial applications at service temperatures up to 350°F.

30 max.

1150

Bucote

Bucote is a hard, highly densified material with a nitrile rubber coating on both sides. Bucote is designed for rigid flange applications where spacing of component parts is critical.

3-10

1150

Velcar B-IO

Velcar is a treated fiber based material with a nitrile rubber coating on both sides. Velcar is highly resistant to oils, gasoline, diesel and heating fuels at temperatures up to 250°F.

25-40

1500

Nicote

25-40

1000

Pro-Formance/MicroPore products feature reduced pore structure while maintaining overall void volume. Designed for use up to 350°C (650°F), these materials exhibit excellent crush resistance and offer superior sealability throughout a wide range of flange load.

Pro-Formance™ MicroPore 0.8mm (.031")

Products

Characteristics and Uses

Density
g/cm³
(45 lbs./cu.ft.)
(min.)

ASTM F 36
Compressibility
% @ 34.5 MPa
(5000 psi)

Minimum
Recovery
%

ASTM F 152
Tensile
Strength
(MPa) psi

ASTM F 36 Oil No. 3

ASTM F 36 Fuel B

Composition

Tensile
Loss
Maximum %

Thickness
Increase
Maximum %

Compressibility
%
Maximum

Weight
Increase
Maximum %

Thickness
Increase
Maximum %

Fiber

Rubber
Binder

PF-4N

Nitrile butadiene binder for maximum fluid resistance. Excellent sealability in a wide variety of environments and flange conditions. For applications up to 250°C (550°F).

1.44 (90)

Synthetic Fiber Blend

Nitrile Butadiene

PF-4S

Designed for various oil, air and coolant applications such as oil pans, front covers, intake manifolds and rear seals. Replacement for styrene butadiene rubber asbestos and non-asbestos joint sheet. Alternative to nitrile butadiene rubber for improved sealability and cost reduction. Styrene binder. For applications up to 290°C (550°F).

1.44 (90)

Synthetic Fiber Blend

Styrene Butadiene

VB-72

High-performance material for transmission valve body applications and other heavy-duty applications with extreme fluid pressures. Excellent erosion resistance. For applications up to 350°C (650°F).

1.44 (90)

18.5 (2700)

Synthetic Fiber Blend

Fully Cured Nitrile Butadiene

MP-2N

MP-2N is specifically engineered for automotive power train, marine and small engine applications. Provides exceptional sealability for coolant, lubrication and induction systems. Suited for less than ideal conditions.

1.41 (88)

15-25

14.21 (2060)

Synthetic Fiber Blend

Nitrile Butadiene

MP-15

Designed for heavy-duty applications, including compressors, diesel engines and others. Neoprene binder. Excellent low flange pressure sealability and torque retention. For applications up to 205°C (400°F).

1.60 (100)

11 (1600)

Synthetic Fiber Blend

Polychloroprene

TN-9040

Fully Cured nitrile binder. Excellent crush resistance and high tensile strength. Recommended for applications where high mechanical integrity is required. For applications up to 350°C (650°F).

1.44 (90)

27.5 (4000)

Synthetic Fiber Blend

Fully Cured Nitrile Butadiene

Syntheseal materials are a direct substitute for asbestos-containing materials. Designed for use up to 180°C (350°F), Syntheseal services a wide range of pressures and internal fluids. Syntheseal is a proven substitute for joint sheet and asbestos-containing beater-addition products.

Synthseal® - for use up to 180°C (350°F)

Products

Characteristics and Uses

Density
g/cm³
(45 lbs./cu.ft.)
(min.)

ASTM F 36
Compressibility
% @ 34.5 MPa
(5000 psi)

Minimum
Recovery
%

ASTM F 152
Tensile
Strength
(MPa) psi

ASTM F 36 Oil No. 3

ASTM F 36 Fuel B

Composition

Tensile
Loss
Maximum %

Thickness
Increase
Maximum %

Compressibility
%
Maximum

Weight
Increase
Maximum %

Thickness
Increase
Maximum %

Fiber

Rubber
Binder

D-8080

D-8080 is a non-asbestos formulated gasket material designed as a direct substitute for compressed asbestos and asbestos-containing beater addition products. It is designed for low-to-moderate flange pressures at temperatures above 180°C (350°F) and is suitable for dry heat applications, electrical fixtures, and other light duty appliances. It can also be used as a radiant heat shield in applications where some degree of insulation is needed.

N-8092

Excellent crush resistance at high flange pressures. Nitrile binder. Recommended for sealing oil, fuels, and water up to 180°C (350°F).

1.20 (75)

15-30

11.0 (1600)

Reinforced Cellulose

Nitrile Butadiene

N-8094